The going is more than a bit slow. But at least there is some paint on my General! Upon looking at my sea of gray plastic otherwise known as my Orcs & Goblins I realize there is much work ahead of me. And soooo very much fodder for Blood and Sprue!
Anyways, on to the photo's. As you can see I tend to get stuck in one area. I get started with intentions of doing a base coat only and THEN doing my shading, highlights etc... but it rarely works out.
Please excuse my dust particles. I'm going with some heavily rusted armor for this mounted Waaagh! wailing warrior. It's quite experimental at this point. But I very much like where the look is going.
Feedback is always appreciated folks.
If you enjoy what you're reading/seeing please follow or subscribe.
Thursday, September 23, 2010
Army Progress > On the Painting Table: Black Orc Big Boss
Good morning! I've got my bowl of cereal with bananas and I'm dreaming of that large coffee I'll inhale on my way to work. For now updating my blog will have to suffice over caffeine.
Currently I'm working on applying a boss worthy paint job to my Black Orc Big Boss on Boar. I had to do a bit of chopping and did my best with some green stuff to suggest this model is an actual Black Orc and not a standard ol' grot boss.
Here's what I came up with:
The biggest changes I made were the Black Orc arm's, shield, basha, an Orcy looking bit on the shoulder pad and a fur cloak on his back to hide the lack of metal armor. For this model I decided to prime white. I like to black wash a white model just to make it a bit easeier to see details while painting. Makes for good photo's of conversions and such as well.
That's all I have for today. I already started slapping some paint on last night and hope to continue tonight. I should have a photo or two more tomorrow morning.
If you enjoy Blood and Sprue please be sure to follow or subscribe.
Currently I'm working on applying a boss worthy paint job to my Black Orc Big Boss on Boar. I had to do a bit of chopping and did my best with some green stuff to suggest this model is an actual Black Orc and not a standard ol' grot boss.
Here's what I came up with:
The biggest changes I made were the Black Orc arm's, shield, basha, an Orcy looking bit on the shoulder pad and a fur cloak on his back to hide the lack of metal armor. For this model I decided to prime white. I like to black wash a white model just to make it a bit easeier to see details while painting. Makes for good photo's of conversions and such as well.
That's all I have for today. I already started slapping some paint on last night and hope to continue tonight. I should have a photo or two more tomorrow morning.
If you enjoy Blood and Sprue please be sure to follow or subscribe.
Wednesday, September 22, 2010
Warhammer > Hobby > Paint: Citadel vs. Vallejo
This seems to be the great debate amongst war gamers. Granted there are several other brands on the market that some would argue are superior... Reaper, Formula P3, and Coat d'Arms to name a few. However we are here to discuss what seem to be the two most widely used brands amongst Warhammer hobbyists.
Citadel vs. Vallejo
I have personally used both brands of paints. Having started out painting my models with acrylic "craft paints," getting my hands on a set of either brand was a godsend for me.
Coverage/Application:
I would compare the coverage of Vallejo paints to that of the Citadel foundation paints. Sans a couple of the lighter, brighter colors. Vallejo Game Colors apply smoothly and evenly with little effort and thin flawlessly, especially with the aid of their own brand thinner.
Citadel paints have been a hit or miss experience for me. I find coverage to be so, so unless painting over a white base coat model. The foundation line is great however. With a bit of thinning these are great for general use. I'd love to see this formula worked into the regular line of paints rather than paying extra for the foundations set.
Pot/Bottle:
Vallejo steals the spotlight here as well. The dropper bottle makes it very easy to mix exact paint recipes on your pallet or in another container. So long as you're prompt about putting the caps back on, these paints will not dry out. At worst you may find your self using a pin to unclog the dropper tip from time to time.
Ahhhhh the dreaded Citadel pot! I don't mean to be so hard on Games Workshop... but the Citadel pots just don't cut it. The problem lies in the cap. These things just do not seal well enough. If you go any length of time between painting (which I do often) you're bound to come back to dried up paint. The design of the pots while not all that different than many others out there is also not very conducive to mixing. Once spoiled by the dropper tip you really start to wonder why anyone would put themselves through such an ordeal!
Ink/Wash:
Citadel has a wonderful line of wash's you can spend a pretty penny on. These are super helpful for taking basic paint jobs to the next level. I suggest everyone experiment with wash's at one time or another. But there's an easier way!
Vallejo offers a line of wash's as well. Where Vallejo shines however is with this wonderful stuff called Glaze Medium. Mix a bit of this in with any of your Vallejo Game Colors and you have a full range of wash's! It has worked exceptionally well with all colors I have tried to date.
Price:
I'm afraid Vallejo wins out here as well.
Vallejo 17ml bottle - $2.20
Citadel 12ml pot - $3.70
I suppose I'm a bit biased but Vallejo is just a better value for the quality and quantity of paint you're getting. I'm glad I made the switch to it. I'm never looking back!
As a courtesy to all the wayward souls who are still using Citadel paints I have provided a Citadel to Vallejo paint conversion chart HERE.
Citadel vs. Vallejo
I have personally used both brands of paints. Having started out painting my models with acrylic "craft paints," getting my hands on a set of either brand was a godsend for me.
Coverage/Application:
I would compare the coverage of Vallejo paints to that of the Citadel foundation paints. Sans a couple of the lighter, brighter colors. Vallejo Game Colors apply smoothly and evenly with little effort and thin flawlessly, especially with the aid of their own brand thinner.
Citadel paints have been a hit or miss experience for me. I find coverage to be so, so unless painting over a white base coat model. The foundation line is great however. With a bit of thinning these are great for general use. I'd love to see this formula worked into the regular line of paints rather than paying extra for the foundations set.
Pot/Bottle:
Vallejo steals the spotlight here as well. The dropper bottle makes it very easy to mix exact paint recipes on your pallet or in another container. So long as you're prompt about putting the caps back on, these paints will not dry out. At worst you may find your self using a pin to unclog the dropper tip from time to time.
Ahhhhh the dreaded Citadel pot! I don't mean to be so hard on Games Workshop... but the Citadel pots just don't cut it. The problem lies in the cap. These things just do not seal well enough. If you go any length of time between painting (which I do often) you're bound to come back to dried up paint. The design of the pots while not all that different than many others out there is also not very conducive to mixing. Once spoiled by the dropper tip you really start to wonder why anyone would put themselves through such an ordeal!
Ink/Wash:
Citadel has a wonderful line of wash's you can spend a pretty penny on. These are super helpful for taking basic paint jobs to the next level. I suggest everyone experiment with wash's at one time or another. But there's an easier way!
Vallejo offers a line of wash's as well. Where Vallejo shines however is with this wonderful stuff called Glaze Medium. Mix a bit of this in with any of your Vallejo Game Colors and you have a full range of wash's! It has worked exceptionally well with all colors I have tried to date.
Price:
I'm afraid Vallejo wins out here as well.
Vallejo 17ml bottle - $2.20
Citadel 12ml pot - $3.70
I suppose I'm a bit biased but Vallejo is just a better value for the quality and quantity of paint you're getting. I'm glad I made the switch to it. I'm never looking back!
As a courtesy to all the wayward souls who are still using Citadel paints I have provided a Citadel to Vallejo paint conversion chart HERE.
Monday, September 20, 2010
Finally Got Some Seatbelts for This Here Wagon...
I'm back. I swear it...to all eight of my followers! I'm working on getting up some army progress updates and how to's, tutorials or whatever you'd like to call them. Other projects I'll focus on are converting, painting techniques and terrain projects.
In the mean time, here is a long overdue photo of my Orcs & Goblins birthday cake (from May! Thanks to Amy and John!)...
In the mean time, here is a long overdue photo of my Orcs & Goblins birthday cake (from May! Thanks to Amy and John!)...
Saturday, April 3, 2010
Back On the Painting Wagon!
While I have been getting weekly battles in I have not been spending nearly enough time modeling or painting. So recently I've dived back into the hobby part of Warhammer. Today's post will just be a quick photo update of what I've worked on in the past month or so.
Orc Boyz: Built, green stuffed, primed and painting progress.
First off, they're finally built with heads et all!! No more will I ruin my buddy John's "immersion."
Next, adding some character to Da Stunty Stompin' Boyz. I've used green stuff to sculpt dwarf bear/head trophies.
Primed.
WIP paint.
Also in the works, I'm converting a Dwarf cannon into a Spear Chukka. But that will be for the next update. Until then I leave you with a drunken video battle report featuring yours truly, the aforementioned John and brought to you by Harpoon UFO - "It is so delicious!"
Orc Boyz: Built, green stuffed, primed and painting progress.
First off, they're finally built with heads et all!! No more will I ruin my buddy John's "immersion."
Next, adding some character to Da Stunty Stompin' Boyz. I've used green stuff to sculpt dwarf bear/head trophies.
Primed.
WIP paint.
Also in the works, I'm converting a Dwarf cannon into a Spear Chukka. But that will be for the next update. Until then I leave you with a drunken video battle report featuring yours truly, the aforementioned John and brought to you by Harpoon UFO - "It is so delicious!"
Monday, February 8, 2010
Epic Fail!
Clearly I did not follow through with the objectives stated in my previous post. The past couple months have brought only limited modeling time and much strife in my personal life. But fear not, I have not abandoned ye old Warhammer blog and certainly have not abandoned the hobby. In fact I did find time to get a whole unit of Orc Boyz built and even did some green stuff work on them. Updates pertaining to those models will come in the near future. For today I thought I would just drop by, announce to my five followers that I am alive and well but most importantly I intend to update - SOON!
Tuesday, December 8, 2009
Paint Quest 1: Orc Arrer Boyz
I think I'm going to approach the sea of gray before me as systematically as possible. To do that I've decided to set painting/building goals per individual unit. Or in the case of this blog, "quest's" because I'm a fantasy nerd and you're a fantasy nerd. It just make's sense!
Paint Quest 1: Orc Arrer Boyz
Paint Quest 1: Orc Arrer Boyz
This one is pretty straight forward. They're already built and primed. My objective's are as follows:
-Base coat
-Black wash
-Highlight
-Fill movement tray gaps
-Base
-Magnetize movement tray
Start date: 12.8.09 Deadline: 1.1.10
It has begun...
Subscribe to:
Posts (Atom)